Backflushing Ascaso versatile models

Disclaimer: The technical statements, support, information and recommendations contained herein are believed to be accurate as of the date hereof, but 1st-line Equipment, LLC does not make representations or warranties, express or implied, as to its accuracy, its completeness, or the results to be obtained. The information is being provided for informational purposes only and is intended for use by persons having adequate skill and expertise regarding the proper selection, use and application of the products and recommendations and at their own risk and discretion.

1st-line Equipment, LLC is not responsible for any injury or damages from such information. Please note that parts are available for purchase from 1st-line Equipment, LLC self service parts portal. These parts do not include any technical support. If you're unfamiliar with the technical aspects of repairing equipment, please contact a professional for proper evaluation.

By continuing to read further, you agree to abide by all the terms and conditions on this website. If you disagree, please leave our website.

Before backflushing, you must remove the following parts:

These parts are what prevent the pressure relief through the 3 way solenoid valve.

You can find these 2 parts in the diagram to the right.

After you remove these 2 parts, you can follow our directions for backflushing.

Exploded technical diagram showing labeled parts of a mechanical assembly, with components separated and identified by numbers such as I.13 and I.15 circled in red. © 2025 1st-line.com

Please note the above information is subject to copyright. It cannot be published by any means without the expressed written consent of 1st-line Equipment, LLC.