1st-line Equipment E61 Grouphead Flow Control Kit
$299.00
Please Note: 1st-line Equipment is not responsible for any damages or losses as a result of self-installation.
WARNING! Please note that we are not responsible for any damage before, during, or after installation. Damages can include, but are not limited to:
- over-tightening the gauge into the grouphead (causing the gauge thread to break and threading broken inside the grouphead),
- breaking of gaskets and o-rings,
- scratches on the mushroom,
- over-tightening of gicleur, and/or
- limescale build-up.
We cannot guarantee this will fit every E61 grouphead.
1st-line Equipment E61 Grouphead Flow Control Regulator
with Stainless Steel Mushroom with gauge. This is known to fit ECM, Profitec, and Izzo espresso machines with the stainless steel mushroom.
*Please Note!! Many of our pictures are stock photos provided to us by the manufacturer and may slightly differ when received.
| Brand | 1st-line |
|---|
Submit Questions Regarding the E61 Grouphead Flow Control Kit
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
what material is the mushroom made out of? is it stainless steel or plated brass?
-
Q what material is the mushroom made out of? is it stainless steel or plated brass? answer nowAsked by nick on April 30, 2023 9:59 pmAnswered by the admin
The manufacturer has stated stainless, but manufacturers do reserve the right (as we have leared many times) to change without any notification to us.
Can you please confirm the gicleur filter screen length and o-ring sizes, are they the same as a Lelit Bianca i.e. 11mm long screen and MC044 o-ring 6.07x1.78?
-
Q Can you please confirm the gicleur filter screen length and o-ring sizes, are they the same as a ...... Read more answer nowAsked by Mark on July 5, 2021 5:16 amAnswered by the admin
Sorry, the manufacturer does not provide measurements, nor do we take measurements as they can change in the future without any notification from our supplier - then future customers would point the the blame on us for different measurements.
Will this fit a VBM Junior HX that is about 6 years old?
-
Q Will this fit a VBM Junior HX that is about 6 years old? answer nowAsked by David Nadeau on June 28, 2021 7:16 pmAnswered by the admin
Sorry, it will not. We may have something in the future.
Will this work on a Rocket R58 ?
-
Answered by the admin
It should, but since we do not sell Rocket espresso machines, we can not guarantee it.
Who manufactures this kit, and where is it manufactured ? It looks identical to the ECM flow control kit minus the ECM branding on the manometer - is it ECM?
-
Q Who manufactures this kit, and where is it manufactured ? It looks identical to the ECM flow cont...... Read more answer nowAsked by Tejas on April 23, 2021 3:51 pmAnswered by the admin
Sorry, we are unable to provide this information.
Hi. What is the difference between this flow control kit and the other one that is $100 less? Is there a significant difference between the units in operation? Is this one, which is more expensive, better in some way? Thanks!
-
Q Hi. What is the difference between this flow control kit and the other one that is $100 less? Is ...... Read more answer nowAsked by George on March 16, 2021 9:29 pmAnswered by the admin The more expensive one is designed in Germany. The less expensive one has two handles. Both work very similar.
